Home > News > Wire Nail: Roof/Concrete/Building/Finishing Nail

Wire Nail: Stainless Steel, Brass, Copper, Iron

  • Roofing nails, size: 9 BWG × 2.5".
  • Brass nail with or without flat head, 2.5".
  • 5/8" × 15 gauge round wire nail ringed.
  • Concrete nails 3 × 50 mm and 3 × 60 mm.
  • Building nail, standard diameter, length 6 cm and 10 cm.
  • Construction nail, 2.7 × 60, 2.8 × 60.
  • Hot dipped galvanized wire nails with head, nail diameter: 3", 4", 6".
  • Stainless steel screws, 6 mm nail diameter, 3" length.
  • Umbrella head roofing nails with plain shank, size: 10 BWG nail diameter × 2.5" nail length.
  • Galvanized roofing nail with umbrella head, BWG 9 nail diameter × 2" length and BWG 9 nail diameter × 2.5" length.
  • Electro galvanized roofing nail, BWG 12 nail diameter × 2" length and BWG 8 nail diameter × 3" length.
  • Concrete nails electro galvanized, lined-shank, with flat head and size 3.5 mm nail diameter × 50 mm nail length.
  • Galvanized hardboard nail, nail diameter BWG 11, nail length 3/4", 1", 1.25", 1.5", etc.
  • Copper nail for use in applying cedar shingles in an exterior application, with 0.25" diameter head and a ring shank 1.5" - 2" long.
  • Electro galvanized roofing nails with plain shank 9 BWG nail diameter × 2" nail length and 9 BWG nail diameter × 2.5" nail length.
  • Electro galvanized roofing nails, twisted shank: 9 BWG, umbrella head length: 2.5".
  • Roofing nails, 3 mm nail diameter, 9 mm washer, 40 mm nail length.
  • Iron nails, material: Q195, Q235, size: 3/4" × 18 G, 1" × 14 G, 1.5" × 14 G.
  • Concrete nail, standard: DIN GB, diameter: 2.2 - 6 mm, length: 15 - 200 mm.
  • Hot dipped galvanized panel pin nails without head, nail diameter: 0.75", 1", 1.5", 2", 2.5", 3", etc.
  • Brass wires for manufacture of brass screws, 17 gauge nail diameter, nail length 2.60 mm, 3.10 mm, 3.40 mm, 3.80 mm, 4.50 mm.
  • Ring shank nails, nail diameter 4.5 mm, nail length 100 mm.
  • Ring shank nails, nail diameter 3.5 mm, nail length 65 mm.
  • Ring shank nails, nail diameter 3.5 mm, nail length 50 mm.
  • Ring shank nails, nail diameter 2.7 mm, nail length 20, 25, 30, 40, 50, 65 mm.
Six roofing nails with round shank and diamond point.
Roofing nails with round shank.
Six roofing nails with twist shank and diamond point.
Roofing nails with twist shank.
Six ring shank nails with flat heads: five nails are on one nail.
Ring shank nails with flat head.
Six ring shank nails with flower-shape heads: five nails are on one nail.
Ring shank nails with flower-shape head.
Six common steel nails with rectangular shank: five nails are on one nail.
Common steel nails with rectangular shanks.
Five ring shank nails are placed together.
Ring shank nail with fluted and ring shank.
Three ring shank nails and six detached heads.
Ring shank nail with detachable heads.
Four ring shank nails with black rubber heads and fluted shank.
Ring shank nail head is made of steel and rubber.
  • Hammer nail - blue zinc coating.
    • Nail diameter: 4 mm, nail length: 42, 52, 62, 82 mm.
    • Nail diameter: 5 mm, nail length: 52, 62, 82, 102, 142 mm.
    • Nail diameter: 6.3 mm, nail length: 156 mm.
  • Wire nails.
    • Wire diameter: 2 mm, nail length: 30 mm.
    • Wire diameter: 2.8 mm, nail length: 50 mm.
    • Wire diameter: 4.1 mm, nail length: 90 mm.
    • Wire diameter: 4.5 mm, nail length: 100 mm.
  • Roofing sheets nail.
    • Nail diameter: 5 mm, nail length: 120 mm.
    • Nail diameter: 4.3 mm, nail length: 100 mm.
    • Nail diameter: 4 mm, nail length: 39 mm.
    • Nail diameter: 3.4 mm, nail length: 48 mm.
    • Nail diameter: 3 mm, nail length: 57 mm.
    • Nail diameter: 2.8 mm, nail length: 66 mm.
    • Nail diameter: 2.8 mm, nail length: 75 mm.
  • Paper strip nails 34 degree, bright, smooth, diamond point.
    • Nail diameter 2.8 mm × 50 mm nail length.
    • Nail diameter 2.8 mm × 65 mm nail length.
    • Nail diameter 2.9 mm × 70 mm nail length.
    • Nail diameter 2.9 mm × 75 mm nail length.
    • Nail diameter 3.1 mm × 90 mm nail length.
    • Nail diameter 3.4 mm × 100 mm nail length.
  • Plastic strip nails 21 degree, bright, smooth, diamond point.
    • Nail diameter 2.8 mm × 50 mm nail length.
    • Nail diameter 2.8 mm × 55 mm nail length.
    • Nail diameter 2.9 mm × 60 mm nail length.
    • Nail diameter 2.9 mm × 70 mm nail length.
    • Nail diameter 3.1 mm × 90 mm nail length.
    • Nail diameter 3.1 mm × 100 mm nail length.
A copper screw nail with twisted shank and flat head.
Copper screw nail.
Four iron nails and each with double heads.
Double head nail is made of iron wire.
Three copper nails with twisted screw on the upper section and flat heads.
Copper nails with twisted screw on the upper section.
Two weld pins with big oval heads, short shank and sharp points.
Weld pin with big oval head.
Lots of copper nails with fluted shanks are placed together irregularly.
Copper nails with fluted shanks.
  • Finishing nails.
    • Size: 2d.
    • Nail length: 1".
    • Gauge number:16.5.
    • Nail head diameter: 0.086".
    • Approx. pieces per lb: 1.473.
  • Double pointed nails with center flange.
    • Nail diameter: 3 mm.
    • Flange diameter: 5 - 8 mm.
    • Flange thickness: 1 mm.
    • Overall length: 80 mm - 90 mm.
    • Tip to flange on one side: 33 mm.
  • Smooth shank coil nails and screwed shank coil nails.
    • Shank diameter: 23 gauge, length: 50, 55, 60, 65 mm.
    • Shank diameter: 25 gauge, length: 50, 55, 60, 65, 70, 75 mm.
    • Shank diameter: 28 gauge, length: 60, 65, 70, 75, 80 mm.
    • Shank diameter: 30 gauge, length: 80, 85, 90, 100 mm.
  • Wire collated nails in coils, bright, smooth shank.
    • Nail diameter: 2.1 mm, nail length: 55 mm.
    • Nail diameter: 2.5 mm, nail length: 40, 45, 50, 55, 60, 65, 70 mm.
    • Nail diameter: 2.8 mm, nail length: 60, 70, 80, 88 mm.
    • Nail diameter: 3.1 mm, nail length: 60, 70, 80, 88, 90 mm.
  • Ring shank diamond point nail.
    • Nail diameter: 2.5 mm, nail length: 55 mm.
    • Nail diameter: 2.8, 3.1 mm, nail length: 40 mm.
    • Nail diameter: 3.2, 3.6 mm, nail length: 70 mm.
    • Nail diameter: 3.4, 3.8 mm, nail length: 90 mm.
    • Nail diameter: 3.6, 4.2 mm, nail length: 90 mm.
  • Electro galvanized nail with flat head and diamond point.
    • Nail diameter: 4.9 mm, nail length: 100 mm.
    • Nail diameter: 4.0 mm, nail length: 80 mm.
    • Nail diameter: 3.35 mm, nail length: 60 mm.
    • Nail diameter: 3.3 mm, nail length: 50 mm.
    • Nail diameter: 3.35 mm, nail length: 40 mm.
A roll of coil nails with twisted shank is penetrated by a stainless steel string.
Stainless steel coil nail.
A roll of coil nails with round shank is penetrated by a copper string.
Galvanized steel coil nail.
A roll of galvanized steel coil nail is connected by plastic strip.
Plastic strip coil nail.
A roll of copper coil nails with twisted shank is penetrated by a brass string.
Copper coil nail is connected by brass string.
A roll of copper coil nail with umbrella shape head.
Copper coil nail with umbrella shape head.
Ten rolls of brass coil nail with umbrella shape heads are placed in the carton.
Brass coil nail is placed in carton.

Inquiry for Our Product

Shandong Xingying International Trading Co., Ltd.
E-mail: info@ironwirenails.com

When you contact us, please provide your detail requirements. That will help us give you a valid quotation.